TI-84+CE Mode 7 Engine development

Moderator: tr1p1ea

User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

This thread will contain development updates/notes for this project.
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

OK So a fair bit of work has gone into this project of late!

I ended up reorganising the engine to make it possible for more rapid development - I'll keep it to myself exactly what I did since it would be met with looks of disapproval from some I'm sure! :D.

Anyway some screenshots from development thus far:
First tests on the CE - reading from random memory:
Image
Image
Test map input and basic sprite test:
Image
Image
Scaled sprite tests:
Image
Image
Sprites based on viewing angle:
Image
Some bugs in rendering:
Image
Palette rotation - could be used for star effect:
Image
Depth sorting tests:
Image
Image
Image
Collision test:
Image
First basic AI test (waypoints):
Image
Mass AI test:
Image
AI pov test - jumpy:
Image

Most test code at this point, working on a very simple track editor to assist development.

Hoping that I can release something in the next couple of months!
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by DJ_O »

This is awesome and it's fun to look at the screenshots one by one to see the evolution of this project. You could definitively do a full MK clone that runs at good speed with this. :)
ImageImageImageImage
User avatar
benryves
Maxcoderz Staff
Posts: 3089
Joined: Thu 16 Dec, 2004 10:06 pm
Location: Croydon, England
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by benryves »

That's looking great, tr1p1ea, can't wait to see how it turns out! :)

Would it be revealing your secrets too much to describe the algorithm you're using? I'm interested in how the resolution drops as you get further down the screen - is that a limitation of the algorithm or a concession to performance?

Even without a perspective effect I struggled to get a simple rotating tilemap working smoothly on a TI-83 Plus, so I'm impressed with how well it's running in your screenshots!

Image
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

That looks really cool Ben!

Granted this is for the CE, which although hampered in it's own way, is much than the monochrome calcs (well comparble to an SE but with a better instruction set).

I have been making mode7 style demos for years, originally based on this webpage: https://www.helixsoft.nl/articles/circle/sincos.htm

Plus you can see there are several concessions with resolution etc, all for speed reasons.

On the plus side I also added characters:

Image
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by DJ_O »

What is the exact clock speed of the CE in ASM mode by the way?

Also very nice tr1p1ea. Please do backups often this time around so you won't lose progress :P

Another thing: This sub-forum is invisible to guests. You might want to fix this for visibility.
ImageImageImageImage
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

There are issues like wait-states that affect the CE's performance - CPU is 48MHz but it is somewhat comparable to a 15MHz SE because of this when factoring in screen resolution - but with a better instruction set.

Also thanks for the heads up, I attempted to fix the guest issue.
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by DJ_O »

By the way, I was wondering if the TI-84+CE has enough memory to allow Mario Kart style courses that are larger than the SNES ones? The SNES ones were on the small side so a lap lasted like 15-25 seconds.
ImageImageImageImage
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

The answer is technically yes, but my engine doesn't support it because it would be slow things down too much.

Though you can do tricks with my engine to achieve a similar outcome since coordinates wrap around (if you drive off one side of the map you appear on the other side, so you can be tricky with map design).
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
chickendude
Extreme Poster
Posts: 340
Joined: Fri 07 Jul, 2006 2:39 pm

Re: TI-84+CE Mode 7 Engine development

Post by chickendude »

This is beautiful! Even in its current state it already looks really fun. calc84 also had some cool mode 7 stuff i believe for the b/w calcs.
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

Yes he did indeed - I wonder if he will ever release it?

I did a bit on the B&W calcs also: Image

Very old and inaccurate but I still have the code somewhere.

Also latest screenshot with all the items :):
Image
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by DJ_O »

Very great tr1p1ea, and that grayscale Mode 7 demo looks cool too. I wonder how many koopa shells will be able to move at the same time on the race track without slowing down too much?
ImageImageImageImage
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

I haven't done too much load testing - however this demo has lots happening on the screen with all the items so I should be able to get things to a point where frame rates are good in most scenarios.
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by DJ_O »

So I tried the demo you posted on TI-Planet and I'm amazed by it so far. Runs pretty fast on my pre-A hardware CE calc and I haven't gotten any crashes so far with OS 5.6 :)
ImageImageImageImage
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Re: TI-84+CE Mode 7 Engine development

Post by tr1p1ea »

I'm glad but unfortunately TI changed some things in later calc revisions - So I had to remove the link from my Cemetech post since it will crash on M+ calcs due to a port unlock.

Working on a fix and thanks for the feedback!
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
Post Reply