ASM programing for USB???
Moderator: MaxCoderz Staff
ASM programing for USB???
I was wondering if anyone knows of a good guide for programing with the Z80 calcs link port.
-
- Calc King
- Posts: 1513
- Joined: Sat 05 Aug, 2006 7:22 am
It is really complicated though, here is 'some' information on the USB ports
Yeah.......King Harold wrote:It is really complicated though, here is 'some' information on the USB ports
I just spent the last two hours reading the USB 2.0 specifications, all I have to say is wow. I think I have some of it down but I have a long way to go and my brain is turning into mush. Thanks for the links. Now back to turning my brain into mush...
-
- Calc King
- Posts: 1513
- Joined: Sat 05 Aug, 2006 7:22 am
Unless you are interested in driver-making and more hacking (e.g. there's still many unknowns left), you should not have to use ANY low level port access when working with USB peripherals on the 84P. Instead, you should be using the much more forgiving usb8x, as mentioned above.King Harold wrote:It is really complicated though, here is 'some' information on the USB ports
"If SOURCE is outlawed, only outlaws will have SOURCE."
-
- Calc King
- Posts: 1513
- Joined: Sat 05 Aug, 2006 7:22 am
Well, I suppose you could do that, its gigantic though and you won't need all of it. Also, if you do it yourself you could integrate it better into the program you're making. But it would be hard yes. Have you successfully made programs using the normal link port? if not then maybe you should do so first.. not saying that you should, but it wouldn't be a bad idea.