Bug

Moderator: tr1p1ea

merthsoft
Extreme Poster
Posts: 496
Joined: Tue 21 Dec, 2004 6:49 am
Location: WI

Bug

Post by merthsoft »

I've mentioned this to you before, Tr1p, but I was able to use a simple solution, now it matters a little bit more...
If you have a matrix that has zero in it (the matrix being your map), and you use the omnicalc sprite routine, it messes up, here's some code...

Code: Select all

{1:Asm(prmXLIB
{2,0:Asm(prgmXLIB
While 1
{4,0,0,12,8,0,11,0,7,0,0,1:Asm(prgmXLIB
Repeat getKey
End
Real(20,0,8,0,8,8,0,0               "Omnicalc's sprite
Repeat getKey
End
End
If you use a matrix that is half filled wiht ones, and half filled with zeros, and you make sure your picture has the two sprites, this'll show you the error... My zero is a blank sprite, and my one is a block...
The reason I have the Repeat getKey is so that it will draw the tile map, then wait, then draw the sprite, wait, and update the tile map...

Two simple solutions are to use XLIB's sprites, or not use zero in the matrix, which I might do (the latter)...
Shaun
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Post by DJ_O »

I guess you are talking about the garbled sprite 0 bug:
Image

Look how the garbled sprites act when you move the cursor. :shock:
Has this been fixed in the recent version of xLIB?
ImageImageImageImage
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Post by tr1p1ea »

Hhhmmm... I have heard of this bug but i have no idea why it happens. Perhaps something it messing with the sprite data.

Have you tried it whilst using sprite page 2? Does the bug still happen.

The pc with the xLIB source is in the shed and has no net access :S.
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
merthsoft
Extreme Poster
Posts: 496
Joined: Tue 21 Dec, 2004 6:49 am
Location: WI

Post by merthsoft »

Whoa, with page two it replaces the screen with a bunch of the sprite that you are using as the omnicalc sprite...
Shaun
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Post by tr1p1ea »

Perhaps Omnicalc uses the saferam areas?
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Post by DJ_O »

I think it use ApdRAM or something like that
ImageImageImageImage
Gambit
Sir Posts-A-Lot
Posts: 252
Joined: Mon 21 Feb, 2005 5:34 am
Location: Laveen, Arizona

Post by Gambit »

Yes, like I said somewhere else, Omnicalc does indeed use saveSScreen for the sprite( function; that's why I'm so frustrated w/ ZGreylib :x

edit: Omnicalc uses the beginning of appBackUpScreen too... Michael took all our safeRAM :(
"If SOURCE is outlawed, only outlaws will have SOURCE."
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Post by DJ_O »

Hmm I never tried page two yet because of the APD thingy. Maybe I could manage to deal with one sprite sheet at time. I am keeping all xLIB version on my websites including 0.1a because some people might want to use only the features of an old version or dont want to modify their programs too much when upgrading to a new xLIB version
ImageImageImageImage
merthsoft
Extreme Poster
Posts: 496
Joined: Tue 21 Dec, 2004 6:49 am
Location: WI

Post by merthsoft »

I don't know anything about ASM, so don't kill me for this, but is there any way to make your own saferam?
Shaun
Gambit
Sir Posts-A-Lot
Posts: 252
Joined: Mon 21 Feb, 2005 5:34 am
Location: Laveen, Arizona

Post by Gambit »

Not "quickly"; appBackUpScreen and plotSScreen are fixed system RAM areas that TI allocated. I suppose you could make an AppVar or something and store the picture there... but only as a last resort.
"If SOURCE is outlawed, only outlaws will have SOURCE."
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Post by tr1p1ea »

Well it appears that Omnicalc is the source of the problem.

This represents a real problem as now i dont really have any decent saferam areas. The only easy way around this would be to simply include 2 screen buffers in xLIB, this would of course drive the size up 1536 bytes.
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
User avatar
DJ_O
Calc King
Posts: 2324
Joined: Mon 20 Dec, 2004 6:47 pm
Location: Quebec (Canada)
Contact:

Post by DJ_O »

That might be an idea, as diortem opnly takes up 10 kb of RAM
ImageImageImageImage
merthsoft
Extreme Poster
Posts: 496
Joined: Tue 21 Dec, 2004 6:49 am
Location: WI

Post by merthsoft »

Or just tell everyone that they can't use sprite 0 if they use Omnicalc...
And then tell them to yell at Michael for taking all the good safeRAM...
Shaun
User avatar
dysfunction
Calc Master
Posts: 1454
Joined: Wed 22 Dec, 2004 3:07 am
Location: Through the Aura

Post by dysfunction »

I think forgetting about sprite 0 is the best idea... besides, I usually leave sprite 0 blank anyways so that a matrix filled with zeros (the default of course) would generate an empty map.
Image


"You're very clever, young man, but it's turtles all the way down!"
User avatar
tr1p1ea
Maxcoderz Staff
Posts: 4141
Joined: Thu 16 Dec, 2004 10:06 pm
Location: I cant seem to get out of this cryogenic chamber!
Contact:

Post by tr1p1ea »

Well i dont think that anyone needs to yell at Michael_V :).
"My world is Black & White. But if I blink fast enough, I see it in Grayscale."
Image
Image
Post Reply